Table Des Matières; Safety Precautions - Mitsubishi Electric Ecodan PAR-WT50R-E Mode D'emploi

Contents
1. Safety Precautions ..............................1
2. Product Outline . ...................................3
3. Names of Parts and Functions ............4
4. Before Operation .................................5
1

Safety Precautions

Read thoroughly the following Safety Precautions before use.
● The following hazardous classification shows the likelihood and severity of hazards if a per-
son does not follow the instructions contained on the following signs.
Indicates a hazardous situation which, if a person does not follow the instruc-
Warning
tions, could result in death or serious injury.
Indicates a potentially hazardous situation that, if a person does not follow
Caution
the instructions, may result in bodily injury or property damage.
● Always keep this instruction manual ready at hand for quick reference. Provide this manual to
the technician or installer in the event that the device is relocated or repaired. Or, if the own-
ership changes, hand this manual to the next owner.
Check installation location.
The device must not be modi-
fied or repaired by the user.
Stop operation when the device
is malfunctioning.
The device must not be dis-
posed of by the user.
Do not let alkaline batteries
become shorted or insert with
polarity reversed. Also, do not
disassemble, heat, or throw bat-
teries in fire.
5. Basic Functions ...................................7
5.1.Changing Set Temperature . ............7
5.2.Forced DHW ...................................8
5.3.Holiday Mode ..................................9
6. F A Q . ................................................10
7. Specifications ....................................10
Warning
Ensure that the device is placed on a hard and stable place to
prevent the device from falling.
Modification or improper repair could cause electrical shock or
fire and the like. For repair, contact the dealer where you pur-
chased the device.
Operating the malfunctioning device without repairing it could
cause breakdown, electrical shock, fire or the like. Should any-
thing abnormal, such as burning smell, occur, stop operation
immediately, turn off power, and contact the dealer.
To dispose of the device, contact the dealer.
Leaked strong alkaline electrolyte could get into your eye, or
explode, or generate heat. Injury, burns, or breakdown of the
device could result. Should strong alkaline electrolyte come
in contact with the skin or clothes, flush electrolyte with clean
water. If electrolyte gets into your eye, flush with clean water
and seek medical attention immediately.
English
1