Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 406.051 Mode D'emploi

•
In the event of a power outage, try not to open the doors in order to avoid cold loss.
•
After a power outage or disconnection of the unit from its socket, do not reconnect the
unit to an electrical supply for at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

Before beginning with repair or cleaning works make sure the device has been
o
disconnected from power socket (pull the power plug!!!) and has cooled down.
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
o
the plug in water or other liquids.
ATTENTION!
The device is not designed to be directly sprayed off with a water jet. Hence, you
must not use pressure water jets for the cleaning of the device!

6.2 Cleaning

Clean the unit regularly.
o
Clean the unit on the inside and outside with a soft, moist cloth and mild cleaning
o
agent. Wipe down with clean water and dry thoroughly.
Never use harsh cleaning chemicals, such as scouring powder, chemicals containing
o
alcohol, or diluting agents which may damage plastic elements or paint.
After cleaning, dry and polish the exterior of the cabinet with a soft and dry cloth.
o
If the unit will go unused for a long period of time:
Disconnect the unit via the ON/OFF switch, in the „O" position;
o
Remove the plug from the socket;
o
Remove all foodstuffs and beverages from the cabinet;
o
Wash the interior and exterior of the unit;
o
Leave the doors open to allow the unit to dry thoroughly.
o
- 28 -