Cleaning The Cabinet; Technical Specifications - DeLonghi AN125HPEK Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
Before cleaning or maintenance, turn the appliance o by
pressing the
button, then unplug from electrical recep-
tacle.

CLEANING THE CABINET

You should clean the appliance with a slightly damp cloth then
dry with a dry cloth. For safety reasons, never wash the air con-
ditioner with water.
Precautions
Never use petrol, alcohol or solvents to clean the appliance.
Never spray insecticide liquids or similar.
CLEANING THE BIO SILVER AIR FILTER
If the filter is dirty, air circulation is compromised and the ef-
ficiency of the dehumidifying and air purifying functions de-
creases.
It is therefore good practice to clean the filter at regular inter-
vals. The frequency depends on the duration and conditions of
operation.
If the unit is used constantly or systematically, you are recom-
mended to clean the filter once a wee .
The filter is housed in the inta e grille.
To clean the filter, extract as shown in fig. 9.
9
Use a vacuum cleaner to remove the dust collected on the filter.
If it is very dirty, immerse in warm water and rinse a number
of times. The water should never be hotter than 104°F (40°C).
After washing the filter, allow it to dry completely before
repositioning it.
The BioSilver filter helps capture dust and pollen and helps re-
duce the growth of bacteria and mold on the filter.
START OF SEASON CHECKS
Ma e sure the power cable and plug are undamaged and the
ground connection is e cient.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To drain all water from the circuit, remove the cap A10 from the
drainage on the bac of the appliance and allow the water to
drain out into a basin (fig. 10).
To facilitate this operation, at the start of the season, it's possi-
ble to apply the water drain hose with cap B6.
In order to properly storage the appliance at the end of the sea-
son, we suggest you cover it with the supplied end of season
dust cover B8 and you put the accessories in the relevant
end of season accessories bag B9.
10
When the appliance is empty, replace the caps.
Clean the filter and dry thoroughly before putting bac .

TECHNICAL SPECIFICATIONS

Power supply voltage
Max. absorbed power
during air conditioning "
Refrigerant "
Cooling capacity
LIMIT CONDITIONS
Room temperature for air conditioning
(with fans at maximum speed)
12
see rating label
"
64 ÷ 104°F 18 ÷ 40°C

Publicité

Table des Matières
loading

Table des Matières