Storage; Transporting And Handling - Bona Edge UX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
Operator Safety (Cont.)
Never become distracted during sanding operations, check
what is happening continually. Use common sense. DO NOT
use the machine, if you are tired, have consumed alcohol or
have taken medication that may affect your judgement or your
body control.
DO NOT smoke during sanding operation.

Storage

It is advisable to store the machine in its original packaging.
Doing so makes it possible to form a column of three packages
maximum, with one on top of the other.
If the machine is removed from the original packaging and is
not used for some time ensure the wheels and disc are not in
contact with the ground.

Transporting and Handling

1) Ensure the power supply cable is disconnected from the mains.
2) Always move the sanding machine using two handles with the bag support turned upwards. Protect the sanding disc with an
abrasive disc and ensure the screws fastening the abrasive disc are secured well. When transporting the sanding machine on
a vehicle always ensure it is well secured and cannot move.
DO NOT use this machine to sand furniture.
DO NOT put any objects into openings. DO NOT use with
blocked openings. Keep free from dust, lint, hair or anything
that may reduce airflow.
DO NOT clean the machine using a high pressure washer or
hose.
This equipment is for dry use only and must not be used or
kept outside in wet conditions. Store the machine in a dry
building, otherwise the machine could be damaged.
Storage temperature from -20°C to 50°C.
EN
Bona Edge UX
7

Publicité

Table des Matières
loading

Table des Matières