Replacing The Velcro Disc; Replacing The Cogged Belt - Bona Edge UX Mode D'emploi

Routine Maintenance (Cont.)

Replacing the Velcro disc

1.
If Velcro disc is worn, scrape
the disc off with a knife.

Replacing the cogged belt

1.
Remove the black stopper on the arm machine.
16
2.
Clean the steel disc with
alcohol or similar.
3.
Glue a new Velcro disc on the
steel plate.
2.
In order to remove the screw and the tapered washer, you
need first lock the disc pulley. For this purpose to put a
screwdriver inside the arm hole.
Bona Edge UX
4.
Check that the disc is
centered: a disc that is
not centered may cause
unbalances and vibrations.