Worx Landroid L Guide D'installation page 7

Masquer les pouces Voir aussi pour Landroid L:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
Trees
If there are roots emerging from the ground, these areas should
be avoided in order not to damage the roots.
Depressions and bumps
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid
operation.
35% (20°)
Slopes
Your Landroid
L has the ability to safely climb slopes up to 35%
®
(20°), so just avoid anything steeper than this.
Placement of Boundary Wire on slopes
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°). The Upper Boundary Wire should have
a distance of at least 45cm between any obstacles. The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°). The Lower Boundary Wire should have a distance of
at least 55cm between any obstacles when it is positioned on a
slope that is 25%.
L 's
®
7
EN

Publicité

Table des Matières
loading

Table des Matières