Changing The Password - Sony Glasstron PLM-A55 Mode D'emploi

Setting the password (continued)
3
Verify a password using the jog dial.
If the password is correct, select YES by
turning the jog dial. If not, select NO.
Then press the jog dial.
If you select NO, return to step 1.
If you select YES, go to step 4 in "Using
the Glasstron" (page 26).

Changing the password

When the power is on, press RESET with a
pointed object such as a ballpoint pen.
• If you have already read the WARNING
messages (pages 18 through 22) (for
example, while watching a video picture),
the display will return to step 1 in
"Setting the password" (page 23).
• If you have not read the WARNING
messages (for example, you have
forgotten your password), the display
will return to step 3 in "Turning on the
Glasstron" (page 18).
If you need to set a password after having
set the Glasstron to operate without a
password, follow the same procedure
above.
Note
Pressing the RESET button does not affect
picture or sound adjustments.
24
-US
PUSH DISPLAY
SEL / PUSH EXEC
RESET
IS YOUR PASSWORD
CORRECT?
123
YES
NO
SEL EXEC