Setting The Password - Sony Glasstron PLM-A55 Mode D'emploi

Setting the password

WARNING
This product should not be used by children age 15 or younger. The eyes of children are still
developing and may be adversely affected by use of this product. To prevent such use, this
product has been equipped with a safety password protection system. Please use a secure
password if children age 15 or younger may have access to this product.
Once you set a password, you have to input the password every time you use the Glasstron. Do
not forget your password. If you like, you can set the Glasstron to operate without a password.
Before you start...
Follow the procedure in "Turning on the Glasstron" (pages 18 through 22). The password "YES
or NO" screen appears on the screen.
1
Select whether to set a password or not using the SEL/PUSH EXEC
jog dial.
If you need to set a password, select
YES. If not, select NO by turning the jog
dial. Then press the jog dial. If you do
not need to set a password, go to step 4
in "Using the Glasstron" (page 26).
2
Enter a three digit password number, one by one, by using the jog
dial.
Turn the jog dial to enter the first
number, then press the jog dial. Enter
the second and third numbers in the
same way.
PUSH DISPLAY
SEL / PUSH EXEC
PUSH DISPLAY
SEL / PUSH EXEC
Screen
DO YOU WISH TO SET A
THREE NUMBER PASSWORD?
YES
NO
SEE THE USER'S MANUAL
FOR DETAILS.
SEL EXEC
ENTER THE FIRST NUMBER.
SEL EXEC
ENTER THE THIRD NUMBER.
123
SEL EXEC
Entered password
continued
23
-US