Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions
Put everything clearly on the ground and control the comple-
teness based on the assembly steps. Attention: The simplified
assembly process requires 100% attention. Especially in the
crease and folding positions. Assembly time is approx. 20min.
Step 1:
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging.
2. Place the screws M8x16 (14), screws M8x55 (10) and washers
(66+67) and springwasher (33) on left and right side of base
frame (1).
3. Fold up with care the supports left and right (3+4) and tighten
the supports left and right (3+4) with screws (10+14), spring-
washer (33) and washers (66+67) at base frame (1).
Step 2:
1. Place the handrail (61) to the supports (3+4) and connect on
right side the connection cable (6) with computer cable (54).
2. Put the hand rail (61) onto the supports (3+4) that screw holes
are aligned and screw it tightly by using screws M8x55 (60)
and washers (67). Ensure that the cable connections made are
not squashed.
3. Attach the handrail covers (56) onto the handrail (61) connec-
tion points.
3
33
66
10
67
14
17
4
66
1
Publicité
Table des Matières
