Denon AVR-591 Manuel De L'utilisateur page 54

ENGLISH
Manual Setup
Setting items
On-Screen Display Master Volume : Display the master volume during adjustment.
(Continued) • Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
iPod : Set the iPod screen display time when the input source is "DOCK".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
TUNER : Set the tuner screen display time when the input source is
"TUNER".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Preset Codes See "Registering preset codes" (vpage 52).
Search a preset code to
register in the remote
control unit.
Quick Select Name Rename Label : Select this to change the displayed name for "Quick
Change the "Quick Select" Select" shown on the screen, as desired.
display title to one you • Up to 16 characters can be input.
prefer. • For character input, see page 35.
Template : The display name can be changed by selecting "Operation"
and "Device Name" from the previously set templates.
1. Use ui to select the name of the Quick Select setting you want to
change, then press ENTER.
2. Use ui to select "Template", then press ENTER.
3. Use ui to select "Operation", then press ENTER.
• Watch / Listen to / Play / For
4. Use uio p to select "Device Name", then press ENTER.
• BD / DVD / TV / Cable TV / Satellite / DVR / VCR / iPod / V.AUX
/ LD / Movie (When "Operation" is selected to "Watch".)
• CD / TUNER / iPod / MD / Tape / Music (When "Operation" is
selected to "Listen to".)
• PC / Game (When "Operation" is selected to "Play".)
• Father / Mother / Son / Daughter / Brother / Sister / Grandfather /
Grandmother / Me (When "Operation" is selected to "For".)
Default : The changed"Quick Select Name" is returned to the default
setting.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
50
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Display Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
setting is changed as shown below.
Bright
OFF
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
· Menu operations
· RESTORER
· MultEQ ®
· Dynamic EQ ®
Confirm the setting
Setting details
DIMMER
is pressed, the
Dim
Dark
· Dynamic Volume™
· Channel Level
Return to previous menu