Denon AVR-591 Manuel De L'utilisateur page 15

5
Play back disc
1
BD
Press to switch an input source
for a player used for playback.
2
Play the component connected to
this unit.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
VOL d ··········································· Volume up
VOL f ······································ Volume down
MUTE ·················································· Muting
4
Set the listening mode.
Set the listening mode according to the playback contents
(cinema, music, etc.) or according to your liking (vpage 23
"Selecting a listening mode (Surround mode)").
Remote control operation
buttons
When power is switched to standby
POWER OFF
Press .
GPower indicator status in standby modeH
• Normal standby : Off
• When "HDMI Control" is set to "ON" : Red
You can also switch the power to standby by
ON/STANDBY
pressing on the main unit.
NOTE
During power standby, a slight amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
Move the cursor
(Up/Down/Left/Right)
1 2 3 4 5
Confirm the setting
ENGLISH
11
Return to previous menu