Audio Adjust; Menu Operation; Surround Parameter - Denon AVR-591 Manuel De L'utilisateur

Audio Adjust

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see "Surround modes and surround
parameters" (vpage 62).

Menu operation

1
Press AMP to set the remote control unit to amplifier operation
mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
ENTER
Press to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Audio Adjust procedure
Surround Parameter (vpage 41)
Tone (vpage 43)
Audyssey Settings (vpage 43)
Manual EQ (vpage 45)
RESTORER (vpage 45)
Audio Delay (vpage 45)
Remote control operation
buttons
.
Move the cursor
(Up/Down/Left/Right)

Surround Parameter

Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Setting items
n In the PLgx or PLg mode
Mode
Set the play modes for the
Cinema : Surround sound mode optimized for movie sources.
different surround modes.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n In the PLgz mode
Height : Dolby PLgz Height playback mode.
n In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
• When "Surround Parameter" – "Front Height" (vpage 42) is set to
"ON", the "Height" mode is set automatically.
• The "Music" mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ ON : "Cinema EQ" is used.
Soften the treble range OFF : "Cinema EQ" is not used.
of movie soundtracks for
better understanding.
DRC Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression always off.
D.Comp Low / Mid / High : These set the compression level.
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
Center Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Confirm the setting
ENGLISH
Default settings are underlined.
Setting details
41
Return to previous menu