Hitachi DH 24PC3 Mode D'emploi Et Instructions De Securite page 24

English
5. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659
7. Bolt placing operation with Chemical Anchor. (Rotation + Hammering)
( Standard socket
on the market
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw
Code No. 981122
24
) (SDS-plus shank)
1/2" (12.7 mm) Chemical
Anchor Adapter
(Code No.303044)
3/4" (19 mm) Chemical
Anchor Adapter
(Code No. 303045)
Drill chuck (13VLRB–D)
(includes chuck wrench)
Code No. 321814
Chuck wrench
Chuck adaptor G
(SDS-plus shank)
Code No. 303623