Miele SKCE0 Mode D'emploi page 14

en-US
 Press the foot switch .
If the suction power of the floorhead
seems too high, reduce the suction
until the head is easier to maneuver
(see "Use - Regulating the suction
power").
Using the accessories supplied
(Fig. 08)
 Crevice nozzle
For cleaning folds, crevices or cor-
ners.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, etc.
 Dusting brush with natural bris-
tles, supplied loose
(depending on model)
For cleaning base boards and as
ornate, carved and particularly
delicate objects. The head can be
swiveled to the best angle.
The crevice nozzle and the upholstery
nozzle are located in holders at the
back of the vacuum cleaner.
The standard versions of certain models
include a turbobrush that is not illus-
trated. The turbobrush is supplied with
its own set of operating instructions.
Dusting brush integrated in the
Eco Comfort handle (Fig. 09)
The dusting brush is suitable for vacu-
uming scratch-resistant surfaces such
as keyboards and for vacuuming up
crumbs.
14
 Press the release button and push the
dusting brush out until it clicks into
place.
 When you have finished dusting,
press the release button and push the
dusting brush back into its original
position until it clicks into place.
Reversible floorhead (Fig. 10)
(included as standard depending on
model)
For general use and also for vacuuming
the stairs.

For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.
Floorbrush Parquet Twister with
swiveling head (SBB 300-3)
(included as standard depending on
model)
This brush is suitable for a variety of
hard floor surfaces and has a swivel
joint enabling it to get into awkward
corners.