Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note on installing in cars with electric parking brake
system
For cars with electric parking brakes, some related functions
(such as video blocking function) may not work properly.
Mounting angle adjustment
Adjust the mounting angle to less than 30°.
Ensuring the mounting location of the
unit
Before installing the unit, consult the installer for
details on the installation of the unit and the
display.
• Make sure that the distance from the front surface
(reference surface) of the mounted unit to the
surface of your car's center cluster is within 22 mm
(
7
/
in). If exceeded, the unit cannot be installed
8
properly.
Front surface of the unit
(reference surface)
Screw hole positions
(for securing the display and the unit)
22 mm (
in) 51 mm to 71 mm (2
7
/
8
• For your safety, adjust the mounting location of
the unit so that it does not interfere with driving
operations such as button (switch) or shift lever
operations.
Hidden area even when the display is
slid up or down
Position of the unit (reference position)
60 mm (2
in) 76 mm (3 in) 60 mm (2
3
/
8
12
GB
Center cluster panel of
your car
1
/
in to 2
7
/
in)
8
8
3
/
in)
8
Parts List for Installation
Power supply leads (1)
Microphone (1)
Double-sided tape (1)
USB extension cable (short)
(1)
Connection cable RC-SR1 (1)
Joint cover (1)
Fixing screw
(for the joint part)
(4 × 6 mm (
3
/
×
1
/
in)) (4)
16
4
This parts list does not include all the package
contents.
Mounting screw
(5 × max. 9 mm
(
7
/
× max.
3
/
in)) (4)
32
8
Flat-mount base (1)
USB extension cable (long) (1)
Cable tie (1)
Rear panel cover (left/right)
(2)
Fixing screw
(for the joint cover)
(3 × 8 mm (
1
/
×
11
/
in)) (1)
8
32
Publicité
Table des Matières
