External Components; Bluetooth - JVC KW-R500 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

External components

External components
For details, refer also to the instructions supplied with the external components.
Playing an external component from Front/Rear AUX
3.5 mm (1/8") stereo mini plug
(not supplied)
Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound
may be interrupted or unclear while listening to an external component.

Bluetooth

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100
(separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of
the unit. (
Installation/Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you
purchased this unit.
Operations may be different depending on the connected Bluetooth device. For
details, refer also to the instructions supplied with the device.
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1 Register (pair) a Bluetooth device with KS-BTA100.
2 Change the <SRC SELECT> settings of this unit.
(Hold)
3 Press MENU to exit.
10
| ENGLISH
Portable audio
player, etc.
3.5 mm (1/8") stereo mini
plug (with "L" shaped
connector) (not supplied)
1 Connect to F-AUX on the control panel
and/or R-AUX on the rear panel.
2 Set the source as necessary.
(Hold)
Press MENU to exit.
3 Select <F-AUX> or <R-AUX>.
4 Turn on the connected component and
start playing the source.
<SRC SELECT>
<R-AUX>
<BT ADAPTER>
<SRC SELECT>
<F-AUX>/<R-AUX>
<F-AUX ON> or
<R-AUX ON>
KS-BTA100

Publicité

Table des Matières
loading

Table des Matières