Receiving A Station Through A List; List-Up; Other Functions; Changing The Sound Settings - Sony CDX-F5710 Mode D'emploi

Receiving a station through a list

— list-up

You can list up the frequency or the name. For
details on labeling a station, see page 10.
1
Select the band, then press (LIST).
The frequency or station name appears.
2
Press (GP/PRESET) +/– repeatedly until
the desired station appears.
3
Press (ENTER) to receive the station.

Other functions

Changing the sound settings

Adjusting the sound
characteristics
— BAS/TRE/BAL/FAD/SUB
You can adjust the bass, treble, balance, fader
and subwoofer volume.
1
Press (SOUND) repeatedly to select
the desired item.
The item changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
* "ATT" is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Rotate the volume control dial
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press < or ,.
Adjusting the equalizer curve
— EQ7 TUNE
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press (MENU).
2
Press (GP/PRESET) +/– repeatedly until
"EQ7 TUNE" appears, then press
(ENTER).
3
Press (SEEK) –/+ repeatedly to select
the desired equalizer type, then press
(ENTER).
4
Press (SEEK) –/+ repeatedly to select
the desired frequency.
The frequency changes as follows:
62 y 157 y 396 y 1K y 2.5K y
6.3K y 16K
5
Press (GP/PRESET) –/+ repeatedly to
adjust the desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
continue to next page t
9