Tuning Automatically; Receiving A Station Through A List - List; Other Functions; Changing The Sound Settings - Sony CDX-GT720 Mode D'emploi

Tuning automatically

1
Select the band, then push the multi
way encoder left/right to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, push and hold the multi way encoder left/right
to quickly locate the approximate frequency, then push
the multi way encoder left/right repeatedly to fine
adjust to the desired frequency (manual tuning).
Receiving a station through a list
— LIST
You can list up the frequency.
1
Select the band, then push (LIST) up.
The preset list appears.
2
Rotate the multi way encoder until the
desired station appears.
3
Press the multi way encoder to receive
the station.
The display returns to normal reception
mode.

Other functions

Changing the sound settings

Adjusting the sound
characteristics
1
Press the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
3
Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
EQ3 parametric
To select an equalizer type: "Xplod" (
"Vocal," "Edge," "Cruise," "Space," "Gravity,"
"Custom" or "off."
DSO*
1
To select the DSO mode: "1," "2" (
"off." The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: "R10" – "0" (
Fader
To adjust the balance between the front and rear
speakers: "F10" – "0" (
Subwoofer
To adjust the subwoofer volume: "+10" – "0"
( ) – "–10"
z
("– ∞" is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
( ), "125Hz" or "78Hz."
z
AUX Level*
2
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 11).
Adjustable level: "+18 dB" – "0 dB" (
"–8 dB"
*1 When tuner is selected as the source, the default
setting is "off."
*2 When AUX source is activated.
),
z
), "3" or
z
) – "L10"
z
) – "R10"
z
) –
z
9