Receiving A Station Through A List - List; Rds; Overview; Setting Af And Ta/Tp - Sony CDX-F7750S Mode D'emploi

Receiving a station through a list
— LIST
You can list up the frequency.
(With the card remote commander)
1
Select the band, then press (LIST).
The frequency appears.
2
Press M or m repeatedly until the
desired station appears.
3
Press (ENTER) to receive the station.

RDS

Overview

FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal.
Display items
A
D
A Radio band, Function
B TA/TP* 1
C Clock* 2
D Preset number
E Frequency* 3 (Station name), RDS data
*1 "TA" flashes during traffic information. "TP" lights
up while such a station is received.
*2 When clock mode is set to "on" (page 12).
*3 While receiving the RDS station, " *" is displayed
on the left of the frequency indication.
To change display items E, press (DSPL) on the
card remote commander.
B C
E
RDS services
This unit automatically provides RDS services as
follows:
AF (Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same programme during a long-distance drive
without having to retune the same station
manually.
TA (Traffic Announcement)/TP (Traffic
Programme)
Provides current traffic information/
programmes. Any information/programme
received, will interrupt the currently selected
source.
PTY (Programme Types)
Displays the currently received programme
type. Also searches your selected programme
type.
CT (Clock Time)
The CT data from the RDS transmission sets
the clock.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.

Setting AF and TA/TP

1
Press (AF/TA) repeatedly until the
desired setting appears.
Select To
AF on activate AF and deactivate TA.
TA on
activate TA and deactivate AF.
AF TA on
activate both AF and TA.
AF TA off deactivate both AF and TA.
Storing RDS stations with the AF and
TA setting
You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
continue to next page t
9