IKRA HRT 4530 Duo Manuel D'utilisation page 12

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Grass Trimmer
1. Technical details
Model
Rated Voltage
Nominal Frequency
Nominal Consumption
No-load Speed
Cutting Width
Line Diameter
Line Length
Line Feed
Weight
Sound Pressure Level
Vibration
Interference suppressed in accordance with EN 55014 and EN 61000.
The machine comply with the safety class II/VDE 0700
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of VDE 0700-1 and VDE 0700-91 and fully comply
with the provisions of the German Equipment and Product Safety Act.
2. General Safety Instructions
Information on noise emission in accordance with
"Machine Noise Information Ordinance 3. GPSGV
and Machinery Directives: the noise pressure level
at the place of work can exceed 85 dB(A). In such
cases the operator will require noise protection (e.g.
wearing of ear protectors).
Attention: Noise protection ! Please observe the lo-
cal regulations when operating your device.
Attention: Using electric power tools, you must
observe following fundamental safety instruc-
tions to protect yourself against electric shock,
against danger of injuries and danger of fire. Read
all these instructions before using the grass trimmer
and observe them. Keep these safety instructions at
a safe place.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless, use
of the machine can involve risks to the user or third
persons, and can cause damage to the machine or
other objects.
Use the machine in a safety conscious manner
for suitable applications and in technically perfect
condition only and according to the operating in-
structions! Immediately rectify or have any faults
rectified which could adversely affect safety!
Read the instruction manual carefully. It is important
V~
Hz
W
min -1
cm
mm
m
kg
dB (A)
m/s²
RT 40 CT (HRT 4530 Duo)
230
50
400
10.000
30
1,4
2 x 4
Tap'n go (duo-spool)
2,3
72 (according to EN 786)
<2,5 (according to EN 786)
that you fully understand and observe the safety
precautions and warnings before starting and using
your trimmer for the first time. Careless or improper
use of any trimmer may cause serious or fatal injury.
Observe all applicable safety regulations, standards
and ordinances. Please familiarise yourself with the
machine before the first use.
3. Application
The machine is exclusively intended for cutting deco-ra-
tive lawn, i.e. lawn edges. Any other use or use going be-
yond that, such as the cutting of brushwood and hedges
or large areas of lawn, is considered improper use. The
manufacturer / supplier is not liable for damages result-
ing from such use. The risk is borne by the user alone.
A proper utilisation also includes the observance of the
operating manual and the compliance with the conditions
of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
4. Safety Instructions
A. General Instructions
1. Your electric trimmer is a high-speed, fast-cutting
power tool. The electrical connection and cutting
tool are potential sources of danger. Therefore,
special safety precautions must be observed to
reduce the risk of personal injury.
GB-1
ENGLISH
Translation of the original Operating Instructions

Publicité

Table des Matières
loading

Table des Matières