Becker Centronic TimeControl TC4410-II Notice De Montage Et D'utilisation page 48

Assembly and Operating Instructions
FUNCTION
ROLLER SHUTTER/BLIND, INITIAL OPERATION
(Shutter/blind selection, date of initial operation)
Note
At first, use the channel selector button to select the desired channel
in operating mode.
FUNCTION
ROLLER SHUTTER/
BLIND
Press the MENU button.
1.
To select the FUNCTION menu, press the + button until FUNCTION ap-
2.
pears.
Press OK to confirm. ROLLER SHUTTER/BLIND appears.
3.
You can choose between roller shutter/blind using the +/- button.
4.
Press OK to confirm. EXPERT MODE OFF/ON appears.
5.
The desired setting can be selected using the +/- button.
6.
Confirm your selection by pressing OK. INITIAL OPERATION appears.
7.
8. Confirm by pressing OK. FUNCTION appears.
Press the MENU button to switch to operating mode
9.
48
EXPERT MODE
OFF/ON
INITIAL
OPERATION
FUNCTION