Switching Off And Disconnecting The Appliance; Switching The Appliance Off; Disconnecting The Appliance; Defrosting - Thermador T18ID Guide D'utilisation

en-us
Switching Off and

Disconnecting the Appliance

Switching the Appliance Off

1. Press the POWER Button.
2. Unplug the Power Plug.
Disconnecting the Appliance
If you do not use the appliance for a prolonged period:
1. Before switching Off, it is most important that you
switch the Water Supply to the appliance Off for
a few hours.
2. Take all food out of the appliance.
3. Switch the appliance Off.
4. Unplug the Power Plug or switch the fuse Off.
5. Empty and clean the Ice Cube Container
(see chapter "Cleaning the Appliance").
6. Clean the appliance interior (see chapter "Cleaning
the Appliance").
7. Leave the appliance doors open to prevent odors
from forming.

Defrosting

Defrosting is actuated automatically.

Cleaning the Appliance

,
WARNING:
Never clean the appliance with a steam cleaner!
,
CAUTION:
Do not use abrasive, chloride or acidic
■
cleaning agents or solvents.
Do not use scouring or abrasive sponges.
■
The metallic surfaces could corrode.
Never clean Shelves and Containers in
■
the dishwasher. The parts may become
deformed!

Proceed as Follows:

1. Before cleaning: Switch the appliance Off.
2. Unplug the Power Plug or switch the fuse Off.
3. Take out the frozen food and store in a cool location.
Place the ice pack (if enclosed) on the food.
4. Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral cleaning liquid. Prevent
the rinsing water from running into the light.
5. Wipe the Door Seal with clear water only and then
wipe dry thoroughly.
6. After cleaning, reconnect and switch the appliance
back On.
7. Put the frozen food back in the Freezer
Compartment.
18

Interior Fittings

All variable parts of the appliance can be taken out for
cleaning (see chapter "Interior Fittings").
Cleaning the Ice Cube Container
If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together. Therefore, the Ice Cube Container should
be cleaned regularly.
,
CAUTION:
A full Ice Cube Containeris heavy.
1. Remove the Ice Cube Container.
2. Pull out the Ice Cube Container, empty and clean
with lukewarm water.
3. Thoroughly rub the Ice Cube Container and Rotating
Metal Screw (for appliances with Dispensing
Function) dry so that new ice cubes cannot freeze
to them.
4. Insert Ice Cube Container and push back until it
engages. If the Ice Cube Container cannot be
pushed all the way back, twist the Rotating Metal
Screw in the Ice Cube Container.
Ice cube production continues.