Rear Panel - Cameo COB LED STROBES Manuel D'utilisation

1
2
Connections, control, and functions of the CAMEO CLSTROBE1 and CLSTROBE2 stroboscopes are
identical.
1
POWER INPUT
Permanently attached 1 m power cord with Schuko plug.
2
FUSE HOLDER
IMPORTANT INFORMATION: Always replace the fuse only with a fuse of the same type with the same rating
(information on the rear panel). If the fuse blows repeatedly, please contact an authorised service centre.
3
DMX INPUT
3-pole XLR socket for connection of a DMX controller (e.g., DMX mixer).
4
DMX OUTPUT
3-pole XLR socket for looping through the DMX control signal.
5
CONTROL BUTTONS
3 easily accessible control buttons permit system configuration.
6
LED DISPLAY
Displays operating modes and additional system settings.
7
ANALOG CONTROLLER INPUT/OUTPUT
The housings of both COB-LED stroboscopes have a permanently mounted safety catch mechanism.

REAR PANEL

6
7
5
:
(CLSTROBE1 SHOWN)
3
4
7