Cameo COB LED STROBES Manuel D'utilisation page 6

INTRODUCTION:
COB LED STROBE 3 X 3.5W
(CLSTROBE1)
CONTROL FUNCTIONS:
• 2-channel DMX controller
• Separate control of brightness and flash frequency
• Analogue control (10V impulse signal)
FEATURES:
• 3 bright COB-LEDs (3.5W)
• Music control via built-in microphone
• Brightness and flash frequency controllable via control panel
• Master/slave functionality
• Rugged housing
• Power consumption: 30 W
• Absolutely silent thanks to convection cooling
• Long life LEDs with especially long service life
• Bracket included
COB LED STROBE 6 X 10W
(CLSTROBE2)
CONTROL FUNCTIONS:
• 2-channel DMX controller
• Separate control of brightness and flash frequency
• Analogue control (10V impulse signal)
FEATURES:
• 6 bright COB-LEDs (10W)
• Music control via built-in microphone
• Brightness and flash frequency controllable via control panel
• Master/slave functionality
• Rugged housing
• Power consumption: 40 W
• Absolutely silent thanks to convection cooling
• Long life LEDs with especially long service life
• Bracket included
OPERATION:
The Cameo COB-LED stroboscopes CLSTROBE1 and CLSTROBE2 are DMX-512-controllable effects lights. They
are equipped with white, high-efficiency chip-on-board LEDs, the intensity and flash frequency of which can be
controlled independently of one another.
The Cameo COB-LED stroboscopes can can be used both individually and in master/slave mode, with music
control, and via DMX-512 protocol.
6