Tineco PURE ONE S12 Série Mode D'emploi page 24

Remove the debris wrapped around the roller
with the Tineco Hair Cleaning Tool.
Brush Roller
Slide the switch to open the brush roller end
cover, and rotate it counter-clockwise to be
able to pull out the brush roller.
Fully reinsert the brush roller into the brush
window and the end cover can be rotated
clockwise until it clicks securely back into place.
Warning:
• The power brush contains electrical components which must not be soaked or washed with water.
Fully reinsert the brush roller at an angle and
push upward until it clicks securely back into
place.
After removing the brush roller, gently clean
the brush window and suction mouth. Remove
the debris wrapped around the roller with the
Tineco Hair Cleaning Tool.
22
click