Charging Time - Tineco PURE ONE S12 Série Mode D'emploi

Runtime
• When in AUTO mode, the runtime is approximately 50 minutes. When MAX power is used, the
runtime is approximately 10.5 minutes (for one battery).
• Estimated runtime data was obtained by a Tineco Laboratory using one battery and non-motorized
accessories.

Charging Time

• A full charge takes approximately 3-4 hours for one battery.
• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
• For any of the following notifications, consult the "Troubleshooting" section of this manual.
When in Use
Battery level > 20%: solid green light.
Battery level ≤ 20%: solid red light.
Blinking red light: fault.
Blinking: brush roller has a blockage.
Blinking: appliance has a blockage, either in the filter or the dustbin.
Blinking: sensor inside the dustbin is obstructed, or the dustbin is not
correctly installed.
Blinking: motor failure.
17