Battery Installation - Tineco PURE ONE S12 Série Mode D'emploi

Battery Installation

Press the battery release button, and remove
the battery.
Wall-mounted Dock Installation
47.25"
(120cm)
Determine the best wall location for mounting
the dock. We recommend placing it 47.25"
(120cm) from the lower screw hole to the floor
(may need to be adjusted based on the actual
situation).
Warning:
• Ensure the wall surrounding the mounting area is free of gas, water pipes, electrical cables and wires.
• To avoid the dock falling, ensure it is firmly installed.
To replace, slide the battery into the slot at
the base of the main body. The battery will
click into position when correctly fitted.
Assemble the two bracket components, with
a "click" to signify correct assembly. Once
this is complete, use the screws provided by
Tineco to affix the dock to the wall.
10
click