Hepa Filter - Tineco PURE ONE S12 Série Mode D'emploi

Pre-filter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-filter from
the mesh filter-holder.
Replace a clean filter to the main body. Put
the dirty pre-filter into the cleaning tool and
connect the cleaning tool to the main body.

HEPA Filter

Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without first installing the HEPA filter.
Do not turn the appliance upside down when
removing or installing the filter to prevent dust
from entering the motor.
Activate the suction to clean the pre-filter. The
appliance will automatically switch off after once
cleaning is completed. Retain the clean pre-filter
as a spare which can be reused.
Do not place the appliance as above when
removing or installing the HEPA filter, to prevent
dust from entering the motor.
20