≥ 250 mm
3.3.4 Lifting pole
L
CAUTION:
Risk of tipping over - Check that the lifting pole is not mounted to the
outside of the welded bushing of the mattress support platform. If it is placed to
the outside there is a risk of tipping over the nursing bed.
The lifting pole can be mounted on both sides of the head section.
1. Insert the lifting pole as far as it will go into the relevant socket ➁ on the head end
of the mattress support platform.
2. Let the arresting bolt slide into the groove .
3. Pull the metal ring
the socket holes
4. Also pull strap
5. Secure the strap.
over the end of the upper frame
.
into the metal loop and through the triangle
Page 16
≤ 60 mm
until the bolts engage one of
; then fix its length.
2030
2017-05