Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna K6500 II Manuel D'utilisation

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the heading
"Personal protective equipment".
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
WARNING! Dust forms when cutting,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
dry grass etc.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
Cutting equipment decal
A= Cutting blade diameter
B= Max. speed of output
shaft
C= Max blade thickness
D= Direction of blade
rotation
E= Bushing dimension
2 – English

KEY TO SYMBOLS

C
D
E E
B
Type plate
Row 1: Brand, Model (X,Y)
Row 2: Serial No. with
manufacturing date (y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Power outputRow 4: Power output
Row 5: Manufacturer
Row 6: Manufacturer address
Row 7: Country of origin
Conforms to UL Std 60745-1, 60745-2-
5 Certified to CSA C22.2 No. 60745-1,
60745-2-5
Environmental marking. Symbols on
the product or its packaging indicate that
this product cannot be handled as
domestic waste. It must instead be
submitted to an appropriate recycling
station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CAUTION!
CAUTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.
NOTICE!
NOTICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
XXX XXX
4005474