Manual Version; Symbols On The Machine; Key To Symbols; Explanation Of Warning Levels - Husqvarna K 1270 Manuel D'utilisation

Manual version

This manual is the International version used for all
English speaking countries outside North America. If you
operate in North America use the US-version.

Symbols on the machine

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Wear personal protective equipment. See
instructions under the "Personal protective
equipment" heading.
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting,
this can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the machine.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
clothes, dry grass etc.
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
Choke
Decompression valve
Starter handle
2 – English

KEY TO SYMBOLS

Refuelling, petrol/oil mix
Starting instruction
decal See instructions
under the heading
Starting and stopping.
Cutting equipment
decal
A= Cutting blade diameter
B= Max. speed of output
shaft
C= Max blade thickness
D= Direction of blade rotation
E= Bushing dimension
Rating plate
Row 1: Brand, Model (X,Y)
Row 2: Serial No. with
manufacturing date (y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6-7: If applicable, EC typ-approval (X, Y): Approval
code, Approval stage
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
!

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
!
CAUTION!
!
NOTICE!
NOTICE! Is used to address practices not related to
personal injury.
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
Huskvarna, SWEDEN
XXXXXXXXXXX
XXXXXXXXXXXX (YY)
WARNING! Tampering with the engine
voids the EU type-approval of this
product.
WARNING! Indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
CAUTION! Indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
C
D
E E
B
XXX XX XX-XX
Husqvarna AB