Key To Symbols; Symbols On The Machine - Husqvarna K 4000 Cut-n-Break Manuel D'utilisation

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the "Personal
protective equipment" heading.
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
dry grass etc.
Water cooling must always be used.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw
blades
Always cut in the correct direction. See
safety instructions!
2 – English

KEY TO SYMBOLS

Rating plate
Row 1: Brand, Model
(X,Y)
Row 2: Serial No.
with manufacturing
date (Y, W, X): Year,
Week, Sequence No.
Row 3: Product No.
(X)
Row 4: Manufacturer
Row 5: A: Max speed of output shaft, B: Cutting blade
diameter, C: Blade bolt diameter
Row 6: D: Input voltage, E: Input current, F: Input
frequency
Row 7: Country of origin
Environmental marking. Symbols on
the product or its packaging indicate that
this product cannot be handled as
domestic waste. It must instead be
submitted to an appropriate recycling
station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
AAAAAA BBBBB CC
DDDD EEEE FFFF
XXXXXXXXXXXXXXX