Electrolux ESL5335LO Notice D'utilisation page 10

10 www.electrolux.com
German de‐
grees (°dH)
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting: e.g.
2. Press
setting.
3. Press the on/off button to confirm the
setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
French de‐
grees (°fH)
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
.
, and
still flashes.
= level 5.
repeatedly to change the
mmol / l Clarke de‐
grees
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
<0.7 < 5
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse
aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press
• The indicators
off.
• The indicator
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
2. Press
= the rinse aid empty notification is
deactivated.
3. Press on/off to confirm the setting.
Water softener
level
7
6
1)
5
4
3
2
2)
1
.
, and
still flashes.
to change the setting.
are