Efco DS 2800 Manuel D'utilisation Et D'entretien page 24

en
24
OPERATION
type can cause damage and wear to the trimmer head.
Sweeping
• The fan effect of the rotating cord can be used for quick and
easy clearing up. Hold the cord parallel to and above the area
to be swept and move the tool to and fro. (Fig. 51)
• When cutting and sweeping you should use full throttle to
obtain the best results.
WARNING: Never cut when visibility is poor or in
51
very high or low temperatures or in freezing weather.
WARNING: If the cutting tool or deflector becomes
clogged or stuck, always turn off the engine and
make sure the cutting tool has stopped before
cleaning. Grass, weeds, etc. should be cleaned off
the cutting tool at regular intervals.