Normal Washer Sounds; Options - Whirlpool duet steam 461970255001C Guide D'utilisation Et D'entretien

Clean Washer with AFFRESH
Use the Clean Washer with AFFRESH
the inside of your washer fresh and clean. This cycle uses a higher
water level. Use with AFFRESH
chlorine bleach to thoroughly clean the inside of your washing
machine. This cycle should not be interrupted. See "Cleaning Your
Washer" in the "Washer Care" section.
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer with AFFRESH
an empty wash drum.
Soak
Use the Soak cycle to help remove small spots of set-in stains on
fabrics. This cycle provides a soak time with warm or cold water
followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum
movement improve the removal of set-in stains. Drain without spin
assures gentle treatment, even for delicate articles.
Rinse/Spin
Use this cycle to get a rinse and spin only. This cycle combines fast-
speed tumbling and extra high speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
A Rinse/Spin cycle is useful for:
■ Loads that need rinsing only, like swimsuits.
NOTE: For more delicate loads, when using a Rinse/Spin cycle
to rinse swimwear, change the Speed Spin Modifier setting to
Medium or Low to avoid fabric stress.
■
Adding fabric softener to a load.
Drain/Spin
Use this cycle to drain your washer or to drain and spin your wash
load. The spin speed is preset to extra high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, hand washables, and
washable woolens should be drained with no spin or low spin speed
to avoid fabric stress.

Normal Washer Sounds

As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation.
16
cycle
®
® cycle once a month to keep
® washer cleaner tablet or liquid
® cycle. Use this cycle with

Options

You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber. Current
selections will glow green. If an option is unavailable with a selected
cycle, the light will not illuminate.
■ See the "Laundry Guide" for an overview of possible options for
each Wash Cycle selection.
■ You can select more than one option for a cycle. Some options
cannot be added to some cycles. For example, Deep Clean
cannot be added to the Quick Wash cycle.
■ If an option is unavailable with a selected cycle, there will be
3 short tones, and the light for that option will not glow when
selected.
Delay Wash
To begin the wash cycle later, select DELAY WASH until the desired
delay time (in hours) shows in the Estimated Time Remaining
display, and then select START. The countdown to the wash cycle
will show in the display window, and the button indicator will blink
until the cycle begins.
IMPORTANT: When delaying a cycle, use only powdered
detergents in the high efficiency "HE" detergent compartment
since liquid detergents may seep out of the compartment during
Delay Wash, before the wash cycle begins.
FanFresh™ option
Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic
tumbling and airflow (aided by a quiet, ultra low energy fan) for up
to 10 hours to help freshen your clothes. During this time, the
"Done" indicator remains activated, the door remains locked, and
the FanFresh™ indicator light will flash. The FanFresh™ option
will automatically stop and the door lock will be released after this
time expires, or if you press cancel at anytime to unload your
laundry.
Deep Clean with Steam
Use this option for heavily soiled loads that need improved stain
treatment, loads with multiple types of stains, or loads you
suspect as having stains, but are afraid may have been missed
(no sorting or searching for stains). When Deep Clean with Steam
is selected, the water temperature of the selected wash cycle is
automatically set to warm. The water will then be slowly heated to
the temperature selected, along with steam, to aid in stain removal.
This option will provide optimal removal of organic stains such as
blood and grass.