Override-Function; Copying Scenes, Programs And Records; Sound-Control - EuroLite DMX Scan Control Mode D'emploi

Delete step
Press and hold the Program-button. Select the desired chaser via the Chase-buttons. Press the Display-
button in order to switch the display to step. Press the respective Bank-buttons in order to select the scene
which is to be deleted. Press the Del-button.
Press and hold the Program-button in order to save the edited chaser.
6.3.5 Delete a chaser
Press and hold the Program-button. Select the desired chaser via the Chase-buttons. Press and hold the
Del-button and press the Chase-button.
6.3.6 Delete all chasers
Caution: When you select this function, all programmed chaser will irrevocably be lost. The individual
scenes and programs are still maintained.
Press and hold the Bank Down-button and the Del-button while disconnecting the device from the mains.
Connect the device to the mains again.

6.3.7 Override-function

With the Override-button, you can take individual channels out of the program and control them manually.
If you like to control e.g. the first channel of the first projector manually, proceed as follows:
- Call up the chaser
- Select projector 1 via the projector select button (LED lit)
- Press the Override-button (LED lit)
- Move the first channel fader and the channel is taken out of the program. Control the channel manually via
the channel fader.
- In order to leave the Override-mode, press the Override-button or projector select button again.

6.4 Copying scenes, programs and records

With the Copy-function, you can make programming of programs and chasers easier by copying already
existent scenes into a program.
Copy a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press the Rec-button and select the desired bank where you want to copy the
scene to. Press the desired Scene-button.
Delete a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press and hold the Del-button and press the desired Scene-button. The DMX-
value of this scene is set to 0.
Copy a program
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the Rec-
button and select the desired bank where you wish to copy the program to. Press the Bank Copy-button.
Delete all scenes
Caution: When you select this function, all programmed scenes will be irrevocably lost!
Press and hold the Program-button and the Bank Down-button while disconnecting the device from the
mains. Connect the device to the mains again.

6.5 Sound-control

You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal. If there is no music
present, the program or chaser stops.
24/46 00042202.DOC, Version 2.2