AEG IKB64303FB Notice D'utilisation page 14

When you set the Power limitation function to
more than 6000 W, the power of the hob is
divided among the sections indicated below.
5.13 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
14 ENGLISH
automatically and adjusts the speed of the
fan.
Automatic modes
Automat‐
ic light
Mode H0 Off
Mode H1 On
Mode On
3)
H2
Mode H3 On
Mode H4 On
Mode H5 On
Mode H6 On
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display
comes on and goes off.
3. Touch for 3 seconds.
4. Touch a few times until
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
Boiling 1) Frying 2)
Off Off
Off Off
Fan speed Fan speed
1 1
Off Fan speed
1
Fan speed Fan speed
1 1
Fan speed Fan speed
1 2
Fan speed Fan speed
2 3
comes on.