7
Video inspection with the Wöhler Camera Trolley
7.1 Twisting the camera
rod
7.2 Tilting the Camera
Trolley
Fig. 23: Wheel set to the lowest
position
Fig. 24: Even in a tilt position the
Camera Trolley continues rolling.
8
Care and mainte-
nance
Video inspection with the Wöhler Camera Trolley
The camera rod and the camera head can always
be rotated in the Camera head holder, even if ac-
cessories are fixed to the camera head. This way,
the rod will not twist.
Even in a tilt position, the camera trolley can still be
pushed through the pipe without problems. Thereto
two conditions are necessary.
•
The wheels must be set to the lowest position,
see figure at the left.
•
The Camera Head must be fixed under the
Camera Trolley.
•
Clean the Wöhler Camera Trolley with water if
necessary.
•
Clean locking buttons and notches with air
pressure.
EN
23