Fixing The Camera Head Holder At The Camera Trolley - Wohler VIS 200 Instructions De Service

Mounting the camera head
6.2 Fixing the camera
head holder at the
Camera Trolley
Fig. 20: Camera head holder fixed
on the Trolley
Fig. 21: Camera head holder fixed
under the Trolley.
Fig. 22: Camera head Ø 51 mm
fixed under the Trolley
22
• Press and hold the locking button 2, see Abb.
5, part 2.
• Slide the camera head holder onto the rail to
the required position.
ATTENTION!
The locking button must audibly engage at the fi-
nal position.
In the same way the camera head holder can be
fixed under the Trolley. This way the Camera head
can be pushed near the pipe wall.
NOTE!
When the camera head holder is centered under
the Trolley, the camera head is best protected. In
this case the wheels may appear in the picture.