Height Adjustment; Mounting The Camera Head; Clamping The Camera Head Into The Holder - Wohler VIS 200 Instructions De Service

Height adjustment

WARNING!
Take care when handling with the sharp-edged rails.
5 Height adjust-
ment
1
2
Fig. 16: Wheel fastening with
locking button (1) and rail
6

Mounting the camera head

6.1 Clamping the camera
head into the holder
20
The height of the 4 wheels of the Camera Trolley
can be fixed in 3 positions. With the hight adjust-
ment it is possible to set the ideal distance be-
tween the camera head and the duct wall.
• Press and hold the locking button (1) at the
wheel.
• Push the wheel to the desired position on the
rail (2)
ATTENTION!
The locking button must audibly engage.
The wheel cannot be completely removed from the
rail.
• If necessary, connect the stabilization sleeve
and/or a supplementary lightning to the cam-
era head. When doing so, observe the instruc-
tions of chapter 3.