Weee Directive; Technical Data - Vinten Vector 950 OE Guide De L'utilisateur

WEEE directive

WEEE Directive 2002/96/EC mandates the treatment, recovery and recycling of electric
and electronic equipment. This product is subject to WEEE disposal regulations. Please
visit www.vinten.com/recycle for details.
Weight (including wedge adaptor and telescopic pan bar)
Height to wedge adaptor mounting face
Length
Width
Typical payload
Tilt range
Pan range
Tilt encoder resolution
Pan encoder resolution
Supported protocols
External power requirements
Internal power requirement - axis encoders
Operating temperature range
Maximum operating humidity
Pedestal/tripod fixing
The Vector 950 OE pan and tilt head is designed for use in television studios and on location to support
and balance a camera and ancillary equipment weighing up to 120 kg (264.5 lb), and to provide digital po-
sitional output for Vinten Active systems. This product is intended for use by television camera operators.

Technical data

16-120 kg (35-264.5 lb) - See balance graph (Fig 3)
60 kg payload to ±90°, 120 kg payload to ±60°
Usage
17.6 kg (38.8 lb)
24.8 cm (11.3 in.)
22.5 cm (8.9 in.)
34.2 cm (13.5 in.)
2,207,598 counts per 360°
2,000,723 counts per 360°
RS232/RS422
12V dc (supplied from Active Serial Box)
5 V dc ±5% 120 mA
- 40°C to + 60°C (- 40°F to + 140°F)
Four-hole flat base
`Quickfix' adaptor
Mitchell adaptor
English
360°
< 80% RH
9