Publicité
Les langues disponibles
Les langues disponibles
ERGON BIKE ERGONOMICS
Impact Protector BP100 (available separately)
You can get to the impact protector pocket by opening the
main compartment (Fig. 2). To remove it – for example when
replacing a protector that has been damaged by a fall –
release the Velcro loop and pull the protector out of the pocket
(Fig. 3). Then insert the new protector completely into the
Always read the instructions for the BP100
impact protector.
Please ensure that the
black side of the impact
protector faces the back
of the user.
Fig. 1
Hydration Bladder / Drinking hose
Open the hydration system compartment and position the fi lled
hydration system. Guide the entire length of the hose from
inside through one of the two openings
system compartment, then thread it through the loops
indicated.
4
Fig. 1
out of the hydration
1
to
2
pocket, being sure that it is positioned correctly. Close the
Velcro loop again. Warning: The black side of the impact
protector always faces the wearer's back (Fig. 1).
Fig. 2
Fig. 2
16
EN
Fig. 3
4
3
2
1
Publicité
