Zephyr Tempest II AK7500CS Guide D'utilisation, D'entretien Et D'installation page 20

Installation Instructions
Horizontal Ducting Conversion
20
4. Remove (4) screws attaching
blower to blower plate. Turn
blower 180 degrees and reattach
to blower plate.
5. Position single blower with single
blower plate as shown. Be sure to
tuck back of single blower plate
into tabs at back of hood. Secure
single blower plate to back of
hood using (4) screws removed
from step 2.
6. Attach 8" round duct collar or
3-1/4" x 10" rectangular duct
collar to back of hood body using
(4) M3.5 x 8 screws.
Tempest II Use, Care, and Installation Guide
P R O
T E M P E S T I I
U N D E R - C A B I N E T