Power Management; Count Down Timer; Minute Minder - AEG HK854400FB Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

26 www.aeg.com

4.6 Power management

The power management divides the
power between two cooking zones in a
pair (see the illustration). The power
function increases the power to the max-
imum level for one cooking zone in the
pair. The power in the second cooking
zone automatically decreases. The heat
setting display for the reduced zone
changes between two levels.
4.7 Timer

Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
00
99
-
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
• To change the Count Down Timer:
set the cooking zone with
or
• To deactivate the timer: set the
cooking zone with
remaining time counts back to
The indicator of the cooking zone
goes out. To deactivate you can also
touch
of the timer to set the time (
minutes). When the indicator
. The indicator
.
. Touch
and
at the same time.
When the countdown comes to an
end, the sound operates and
es. The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
dicator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch
When the indicator of the cooking
zone starts to flash slow, the time
counts up. The display switches be-
tween
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with
touch
The indicator of the cooking zone
goes out.

Minute Minder

You can use the timer as a Minute Mind-
er while the cooking zones do not oper-
ate. Touch
timer to set the time. When the time
comes to an end, the sound operates
00
and
• To stop the sound: touch
4.8 STOP+GO
. Touch
The
that operate to the lowest heat setting (
).
. The
00
When
.
the heat setting.
The
function.
again and again until the in-
of the timer
comes on.
and counted time (minutes).
or
to deactivate the timer.
. Touch
or
flashes.
function sets all cooking zones
operates, you cannot change
function does not stop the timer
00
flash-
and
of the

Publicité

Table des Matières
loading

Table des Matières