Adjustment - CERTIFIED 060-0753-4 Guide D'utilisation

ADJUSTMENT

Setting the cutting height
As shown in Fig. 13
CAUTION! Adjust the cutting height
only when the engine is switched off
and the spark plug has been pulled.
NOTE: For shipping purposes the height
adjustment position may not be adjusted to the
cutting position. Before operating the mower
adjust cutting height to the normal cutting
position.
The cutting height is centrally adjusted with cutting height adjusting handle. Different cutting
heights can be selected.
Pull the adjusting handle out and select the desired cutting height. The handle snaps into the
desired position.
From position 1 to position 7, the cutting heights range from 1 1/4 to 3 3/4'' (31 to 95 mm).
Setting required function
NOTE: This lawnmower has three functions. Change functions by changing the installed
accessories as shown in the following chart.
To convert mower mulching plug
For rear bagging
For mulching
For side discharging
"√": installed "×": removed
grass bag
×
√
√
Fig. 13
3 3/4'' (95 mm) 1 1/4'' (31 mm)
side discharge duct
√
×
×
15
×
×
√