CERTIFIED 060-0753-4 Guide D'utilisation page 14

1. Remove the oil filler dipstick and wipe oil from
it with a clean cloth (see Fig. 9).
2. Insert the dipstick into the oil filler neck, but
do not twist it closed (see Fig. 9-1).
3. Remove the dipstick and check the oil level:
the oil level must be between the Min and Max
marks on the dipstick. If near the lower level,
fill to upper lever with the recommended oil
(SAE30 or equivalent). Do not overfill. Wipe
away any spilled oil (see Fig. 10).
4. Align the ribs of the cap with the groove of the
filler neck, then rotate to secure it (see Fig. 11).
Fig. 9-1
Fig. 10
Fig. 11
13