CERTIFIED 060-0753-4 Guide D'utilisation page 13

12
model no. 060-0753-4 I contact us: 1-844-428-7277
Assembling the side discharge chute
As shown in Fig. 8
NOTE: When changing to the side
discharge, remove the grass bag and
insert the mulching plug.
1. Lift the side discharge cover with one hand
and hook in the side discharge chute with
the other hand.
2. Release the side discharge cover to secure
the chute in position.
Checking and filling engine oil
As shown in Figs. 9 to 11
CAUTION! The following procedures and
adjustments must be performed before
the engine is started.
Do not attempt to make any of these
adjustments while the engine is
running.
CAUTION! To prevent engine damage,
the engine is shipped without oil or gas.
The engine must be filled with the
correct grade of oil and gas before
starting the engine.
NOTE! Running the engine with a low oil level will cause engine damage. It is recommend
that high-detergent, premium-quality 4-stroke engine oil used. Using non-detergent oil
can shorten the engine's service life, and using 2-stroke oil will damage the engine.
CAUTION! Always use high-quality detergent oil classified SAE30 oil (or equivalent, such
as SAE 10W/30, often called 4-stroke lawnmower oil).
Never use additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed after the first 5
hours of use.
NOTE: To check the engine oil level, stop engine and place the mower on a level
surface.
Fig. 9
engine oil filler neck