Assembling The Grass Bag - CERTIFIED 060-0753-4 Guide D'utilisation

Tying down the connection cord
As shown in Fig. 5
Attach the connection cord to the handle with
the cord clip (supplied).

Assembling the grass bag

As shown in Fig. 6-1
1. Put the grass bag frame into the grass
bag with the rigid part of the bag on the
bottom. Make sure the frame handle is
outside of the bag top.
2. Slip the vinyl bindings over the frame.
Attaching the grass bag to the
mower
As shown in Fig. 6-2
1. Lift the ejector flap with one hand and hook
in the grass bag.
2. Release the ejector flap to secure the grass
bag in position.
Assembling the mulching plug
As shown in Fig. 7
1. Remove the grass bag
2. Push the plastic mulching plug into the
discharge chute until it is locked in place.
3. Release the flap. It will close back to cover
the mulching plug.
Fig. 5
Fig. 6-1
Fig. 6-2
11