Adjustment; Setting The Cutting Height; Grass Bag; Side Discharge Chute - CERTIFIED 299-7799-8 Guide D'utilisation

ADJUSTMENT

Setting the cutting height

As shown in Fig. 13
CAUTION! Adjust the cutting height only
When the engine is switched off and the
spark plug has been pulled.
The cutting height is centrally adjusted with the
cutting height adjusting handle. Different cutting
heights can be selected.
Pull the adjusting handle out and select the
desired cutting height. The handle snaps
into the desired position.
From position 1 to position 7, the cutting heights
range from 1 1/4 to 3 3/4'' (31-95 mm).
Setting required function
NOTE: This lawnmower has three functions. Change functions by changing the installed
accessories as shown in the following chart.
To convert mower
For rear bagging
For mulching
For side discharging
"√": installed "×" : removed
mulching plug
×
√
√
Fig. 13
3 3/4'' (95 mm)

grass bag

side discharge chute

√
×
×
15
1 1/4'' (31 mm)
×
×
√