To Stop The Engine - CERTIFIED 299-7799-8 Guide D'utilisation

3. Pull the starter handle out approximately
4 to 6" (10 to 15 cm) until you feel a
resistance and then start the engine
with a sharp pull (see Fig. 15-1).
NOTE: If the engine fails to start after
three pulls, repeat the process.
4. Once the engine is running, put the starter
rope into the rope guide (see Fig. 16).

To stop the engine

As shown in Fig. 17
Release the engine start/stop lever. It will return
to its initial position and the engine will
automatically switch off.
Fig. 15-1
Fig. 16
Fig. 17
17